Industrial Grade 2-in-1 Rust Converter & Metal Primer

Our Rust Converter & Primer is the ultimate solution for protecting your metal surfaces from further corrosion. Available in Pint, Gallon, and 5 Gallon sizes, this 2-in-1 product can be easily applied on damp surfaces, saving you precious time and effort.

One of the key advantages of our rust reformer is its ability to COVER 4X MORE AREA compared to traditional products. The Pint size can cover up to 125 sq. ft., the Gallon up to 1000 sq. ft., and the 5 Gallon up to 5000 sq. ft. This means you get a bigger bang for your buck when protecting your metal surfaces.

What sets our rust converter apart is its versatility. It can be diluted with up to 20% water and applied using a spray gun, making application a breeze. Additionally, our industrial-strength formula can accept all top coatings, including oil-based, water-based, and enamels. If desired, you can even skip the top coating altogether, as our primer does not require one.

Cleaning up after use is a simple task thanks to our water-based formula. Your tools can be washed quickly without the need for any soap or chemical products.

Engineered for maximum performance, our rust reformer is UV and Hydrogen Sulfide resistant, ensuring long-lasting protection for your metal surfaces. It's also environmentally friendly, containing less than 1% VOCs and no lead or oily solvents and resins.

Versatile Applications: - Automotive: Restoration, Vehicle Frames, Recreational Equipment, Utility Trailers, Ramps, Floorboards, Quarter Panels - Marine: Bridges, Ships, Decks & Deck Railing, Boat Trailers, Ferries, Oar Locks, Shipping Containers - Industrial: Storage & Fuel Tanks, Structural Steel, Manufacturing Equipment, Farm Equipment, Implements, Fencing & Gates, Pipes - Home: Garden Tools, Lawnmowers, Trailers, Wrought Iron Furniture & Railings, Decorative Screens, Pet Housing, Mailboxes, Fences

Preparation and Application: 1. Wire brush the surface to remove all loose, flaky rust, but do not brush down to bare metal. 2. Wipe away debris with a cloth, brush, or air pressure, ensuring the surface is free of grease and oil. 3. Stir the product thoroughly until a smooth, even consistency is obtained. 4. Apply the product with a brush, roller, or sprayer, making sure the metal surface is uniformly covered.

Dry and Curing Time: - Allow the converter and primer to dry completely for 48 hours before applying a top coat. - If no top coat is to be applied, a second coat of the product may be applied before the first coat has dried, within 2 to 4 hours.

We stand behind the quality of our rust eliminator, which is why we offer a 100% risk-free guarantee. Get your anti-rust metal solution today and protect your valuable assets with confidence.

product information: